Rhino Radial Arm Polishing System
The Rhino system has been developed for rapid surface grinding and polishing of MARBLE and SLATE faces. The 250mm diameter QRS backed discs quickly and easily achieves the required prepared finish right through to a high gloss finish using standard acid glossier blocks.
The first two grades of metal bond are optional depending on the condition of the marble/slate surface. If these are used stages 1 and 2 can then be missed out. Recommended speed 500 to 800 RPM. Designed to be used wet.
QRS backed converter holder disc available.
| Recommended sequence | ||||||
| Metal Bond | Metal Bond | 1 | 2 | 3 | 4 | 5 |
| Coarse 40/50 | Fine 150/170 | GREEN 60 | BLACK 120 | RED 200 | YELLOW 600 | †Acid Block |
†Conventional acid glossier blocks eg Frankfurt/Munchen seg.
| For MARBLE and SLATE ø250mm (QRS) | |
| GRADE | CODE |
| Metal Bond – 40/50 | *SMB150 |
| Metal Bond – 150/170 | *SMB155 |
| 60 | *BEPN130A |
| 120 | *BEPN130C |
| 200 | *BEPN130D |
| 600 | *BEPN130E |
| QRS Backing Disc | *BMP035A |
