You are here: Home > Engineering Introduction > Resin Bonded > Type 14F1 OPG Wheel

Tel: +44 (0)1580 891662

Resin Bond CBN & Diamond
Type 14F1 OPG Wheel

The radius edgeed 14F1 optical profile wheels are available to customers specific grinding applications, are manufactured in either CBN or diamond according to the type of material to be ground. When ordering please state wheel diameter (D), grinding width (U), overall wheel thickness (T), layer thickness (X), bore size (H) and edge radius size (R). Grinding parameters are also required to enable correct grit size and bond type to be advised.

wheelgraphic
Type 14F1 OPG Wheel
CODE DESCRIPTION
RMR Resinoid OPG Wheel
D U X R T
40 2/3/4 3.2 1.0/1.5/2.0 6
50 2/3/4 3.2/5.0 1.0/1.5/2.0 6
75 2/3/4 3.2/5.0 1.0/1.5/2.0 6
100 2/3/4 3.2/5.0 1.0/1.5/2.0 6
125 2/3/4 3.2/5.0 1.0/1.5/2.0 6
150 2/3/4 3.2/5.0 1.0/1.5/2.0 8
Resin Bond 14F1_OPG_Wheel
CBN RESIN BOND 14F1 OPG WHEEL

Please state part number when ordering. When ordering any of these items please advise us of the bore size ('H') you require. All measurements in tables are in mm.